Last Modified: 11-29-2007 1.6 A
Service Category: Vehicle Exterior Section: Door/Hatch
Model Year: 2008 Model: Sequoia Doc ID: RM0000035F7003X
Title: DOOR / HATCH: POWER BACK DOOR TOUCH SENSOR (for LH Side): REMOVAL (2008 Sequoia)

REMOVAL

1. REMOVE POWER BACK DOOR ROD DOOR / HATCH: BACK DOOR: DISASSEMBLY (2008 Sequoia)+

2. REMOVE BACK DOOR CENTER GARNISH DOOR / HATCH: BACK DOOR: DISASSEMBLY (2008 Sequoia)+

3. REMOVE BACK DOOR SIDE GARNISH RH DOOR / HATCH: BACK DOOR: DISASSEMBLY (2008 Sequoia)+

4. REMOVE BACK DOOR SIDE GARNISH LH DOOR / HATCH: BACK DOOR: DISASSEMBLY (2008 Sequoia)+

5. REMOVE BACK DOOR STRAP COVER DOOR / HATCH: BACK DOOR: DISASSEMBLY (2008 Sequoia)+

6. REMOVE BACK DOOR PULL STRAP DOOR / HATCH: BACK DOOR: DISASSEMBLY (2008 Sequoia)+

7. REMOVE BACK DOOR TRIM BOARD ASSEMBLY DOOR / HATCH: BACK DOOR: DISASSEMBLY (2008 Sequoia)+

8. REMOVE BACK DOOR SERVICE HOLE COVER DOOR / HATCH: BACK DOOR: DISASSEMBLY (2008 Sequoia)+

9. REMOVE POWER BACK DOOR SENSOR LH

(a) Disconnect the connector.

(b) Remove the 6 screws.

(c) Disengage the 2 clips and remove the power back door sensor assembly.